Vector Optics Universal Laser Bore Sight .22 To .50 Cal

 

 

There are no reviews for this item.
WRITE A REVIEW

 

 

Universal Laser Bore Sight By Vector Optics The SCBC01 Laser Boar Sight Comes With 4 Bore adapters That Will Fit Any .22 To .50 Caliber Rifle Or Handgun. The Boar Sight Goes Into The End Of The Barrel And projects a Red Laser Beam Out From The Center Of It. This Allows For The Accurate Bore Alignment Of Scopes, Iron Sights, Or Laser Sights On Any Handgun Or Rifle. Proper Setup Of SCBC01 Bore Sight Install The Appropriate Screw Into The Right Sized Adaptor For Your Firearm. (Longer Screw In larger Caliber. Sorter Screw For smaller Caliber) Screw Adapter Into The Back Of The Laser Bore Sight. (As Shown Above) ü The Adapter expands larger as You Turn It Into The Laser Bore Sight. Adjust The Adapter For a Snug Fit Into The Barrel. Slide Unit In Until The larger Tapered End Stops. This Has Now Aligned It With The Center Of The Axis Of The Bore Proper Operating Of Laser Bore Sight Make Sure The Unit Is Pointed In a Safe Direction Before You Turn It On. To Turn The Laser On Rotate The Switch a Half Turn In Either Direction Until You Feel a Click And The Laser Is On. To Turn Laser Off Rotate The Switch Another Half Turn Batteries The SCBC01 Laser Bore Sight operates Off Of (3) LR49 / Ag13 Batteries Witch Already Come installed In The Unit. You Can Expect Over 1 Hour Of Continuous Use Out Of The Batteries. To Replace The Batteries Turn The Switch/Battery Holder To The On Position. Push Switch Forward (Toward The Laser End) slightly And Lift Out From Rear. Aligning Your Sight Note: Final Adjustments Should Be Made At The Range For Scoped Firearms 1. If You Have The Ability To Bore Sight Your Scope at 50 – 100 yards then No Compensation For The Offset Of The Scope And Barrel Will Be Necessary, Just Adjust Your crosshairs To Correspond With The Laser Dot. 2. Shorter distances Such as 25 – 50 Feet Will Need To Be Compensated For By Measuring The Approximate Distance Between The Center Of Your Barrel And The Center Of Your Scope. Adjust Your Scope That Distance Above The Laser Dot. For Iron Sights Adjust The Sights To Place The Projected Laser Dot On Top Of The Front Sight Blade. The Distance For Sighting-In Iron Sights Is Not Near as Critical, However The greater The Distance The greater The Accuracy. Download PDF Users Manual Click Here! Manufacturer: Vector Optics Model: SCBC-01 SKU: SCBS01  

Manufacturer  Vector Optics
Mfg No SCBC-01
SKU 1025861
UPC 1025861